Welcome back to another exciting video presented by Lord Gizmo.

In today’s episode, we showcase awe-inspiring machines that push the boundaries of capability.

But before we dive in, make sure to subscribe to our channel and activate the notification bell for the latest updates.

Our first highlight is none other than the incredible Kojima Gumi, a true giant in the realm of grab dredging systems. Prepare to witness the world’s most expansive and largest machine of its kind.

In a single scoop it can lift 370 tons and it’s 200 cubic meters.

The Electric Hydraulic system offers an enormous grabbing power due to its grab weight and hydraulic cylinder.

Far more than cutter section dredging, this machine can not only dredge soft soil but hard soil as well.

You can expect its cutting force, which is enforced, up to 990 tons, and the perforɱaпce with soft rocks is highly likely.

It has two spuds on both sides.

With them it can be shifted without an assistant or push boat or anchor wire.

While lifting up any weight, the machine auto balances itself.

Next up we have a machine from Rossendorf Gmbh.

They they’ve combined the fence tractor with a Kemper’s hemp harvester and a Mcdonald’s universal cutting unit.

The connection of the cutting unit via the back of the chopper is height adjustable up to approximately 3.5 meters.

It cuts bits of hemp with the same length the machine pulls out from the back, whereas useful harvested hemp is thrown into the support vehicle.

Although the project is in the development stages, you can witness the results.

Up next, we have a cool Mars rail sheer Rp2000.

This machine is designed to cut uic60 rails.

It can route 360 degrees and takes only 5 seconds for cutting a rail.

The weight of this beast is around 20 to 30 tons.

Its powerful hydraulic system generates 350 bar of pressure.

Not only that, but also it can be used to carry or load rail bars.

This machine delivers the hard job of days within hours.

No doubt this excavator is awesome.

Up next we have copel, a hand running harvester with its innovative wheel system.

These metallic wheels help the driver to grip on steep slopes and comfort on hard surfaces.

The machine runs on a motor engine and the wheel motors are driven individually in opposite directions and provide full control when turning, with minimal effort and maximum protection of the ground.

The device can be turned comfortably.

You can also operate with the help of a remote control system.

Ferngesteuert ohne Problem

Its mower is blockage free and insensitive to foreign bodies, even through cuttings that have not been cleared away or rotten next we have the solitude plugin, a snow removal motor.

This machine consists of a unique forward plow.

It works very well on roads and removes tons of snow from the route with just a single pass.

This machine is reliable and works opᴛι̇ɱally at all ᴛι̇ɱes, which gives you low repair costs and, not least, the lowest lifeᴛι̇ɱe cost.

Whether you plow city streets, country roads or on the high mountains, Saltwick, Logan Aes has a plow that meets your needs.

Nygsx garbage shears are designed to cut municipal solid waste into fine pieces for high density packing into trucks, saving transport costs and space in landfills over ᴛι̇ɱe.

The Gsx Series features jaws with biomimetic teeth that bypass and shear, providing the right solution for mass waste handling and processing in limited spaces.

The main frame is built to last, with Qt-100 quenched and tempered steel plate and Ar500 in critical wear areas.

Heavy wall torque tubes tie the jaws together and prevent twisting and racking of the structure.

Oversized pivot pins and bushings ensure durability and long life.

The optional high pressure brace cylinder with rod guard allows opᴛι̇ɱum jaw positioning under all working conditions.

Direct pin on or quick coupler versions are available to suit virtually any heavy duty msw application.

This device is a smart and quick solution for farmers who have to waste a lot of ᴛι̇ɱe dragging water into the field.

It can be mounted with a tractor, just like regular extensions.

After that, he runs its motor with the help of tractor engine power.

You can also take the water far away with the help of an extra pipe.

This is the perfect water dragger in the market.

Do the biggest problem with cranes is that they cannot be moved as fast as the crane industry needs.

Thanks to effort, this crane can cover incredible distances and extraordinary lifting capacity, making it an essential investment.

To be unique on the trunk crane market, the exclusive wind in drive system that allows a fast and flexible use of the unit in the most challenging working conditions.

With this crane, you can reach at heights of 60 meters with a joint height of 54 meters.

No doubt the 2655 has the maximum outrage in its category.

VIDEO: